PIM-SM (Sparse Mode)
Event Log Messages
Event Log Messages
Message Meaning
< multicast-addr >/< mask > Inconsistent
The mask entered for the specified multicast address does
address and mask.
not specify sufficient bits to include the nonzero bits in the
mask.
<pkt-type> pkt, src IP < ip-addr > vid < vid-
A PIM packet was received that doesn't have a neighbor.
# > (not a nbr)
Bad <parameter-name> in <pkt-type> pkt
The PIM packet was dropped due to a bad parameter in the
from IP < ip-addr >
packet from the IP address shown.
BSM send to < ip-addr > failed
A BSM (Bootstrap Message) send failed. The IP address
shown is the BSM destination address.
Candidate BSR functionality disabled
Candidate BSR functionality has been disabled.
<pkt-type>
Candidate RP functionality disabled
Candidate RP functionality has been disabled.
C-RP advertisement send to < ip-addr >
A C-RP advertisement send failed. The IP address shown is
failed
the destination address of the message.
Enabled as Candidate BSR using
Candidate BSR functionality has been enabled at the
address: < ip-addr >
indicated IP address.
Enabled as Candidate RP using
Candidate RP functionality has been enabled at the
address: < ip-addr >
indicated IP address.
Failed alloc of HW <flow> for flow
Hardware resources are consumed and software routing is
< src-ip-addr >, < multicast-addr >
being done for the flow.
Failed to initialize <pkt-type> as a
The IP address manager PIM callback routine failed to
call back routine
initialize.
Failed to alloc a <pkt-type> pkt (vid
Allocation of a packet buffer failed message.
< vid-# >)
I/F configured with IP < ip-addr > on
The IP address on the PIM interface has changed to the
vid < vid-# >
indicated address.
I/F removal with IP < ip-addr > on vid
The PIM interface has been removed due to IP address
< vid-# >
removal or change of the indicated IP address.
4-68
