NOTE:
For a brief, printer friendly data sheet that describes this product and informs you of the essential capabilities and
specifications, please visit:
http://h71028.www7.hp.com/ERC/downloads/4AA1-0071ENW.pdf
Processor
Intel® Itanium® Single-Core Processors Model 9110N (1.6 GHz, 12MB L3 cache, FSB533)
Intel® Itanium® Dual-Core Processors Model 9140M (1.66 GHz, 18MB L3 cache, FSB667)
Intel® Itanium® Dual-Core Processors Model 9120N (1.42 GHz, 12MB L3 cache, FSB533)
Upgradeability
Upgradeable to two (2) processors
NOTE:
The HP Integrity BL860c only supports 1 or 2 processor configurations. Processors must
be identical
Cache Memory
1.2 MB per Core Level 2 cache memory
Chipset
HP zx2
Memory
Type
PC2-4200 DDR2 DIMMs (DDR2-533)
Minimum
2 GB (2 x 1 GB)
Maximum
48 GB (12 x 4 GB)
NOTE:
Memory modules are DIMM pairs.
NOTE:
Double Chip Spare is enabled in a single memory module. Double Chip Spare requires
identical DIMM types and capacities
Network Adapter
Four (4) embedded NIC ports, plus one (1) additional management NIC port:
Four (4) NIC ports via (2) Broadcom 5704 Dual Port Gigabit NIC
One (1) additional 10/100 NIC dedicated to Integrity iLO 2 Management
Up to twelve additional Gigabit Ethernet ports via the NC364m Quad-port mezzanine adapter
Expansion Slots
Three Mezzanine slots (two (2) Type II PCIe, one (1) Type I PCIe x4)
Integrated
Manageability
Integrity Integrated Lights-Out 2 (iLO 2) Advanced Pack (Factory integrated)
HP BladeSystem c-Class Onboard Administrator
HP BladeSystem c-Class Virtual Connect
Storage Controller
LSI 1068 SAS Controller
2 SAS Channels (one to each HDD)
Supports RAID 1
Maximum Internal
Storage
Hot Plug SAS
600GB SAS
2 x 300GB SAS
QuickSpecs
HP Integrity BL860c Server Blade
Standard Features (Server Blade)
DA - 12671 U.S. QuickSpecs — Version 18 — 2/18/2009
Page 4
