A SERVICE OF

logo

Open as PDF
next previous
Removal and replacement procedures
Maintenance and Service Guide 4–11
5. Spread the retaining tabs 1 on each side of the memory module to release the memory module. (The edge of
the module opposite the slot rises away from the computer.)
✎
If necessary, use a non-conductive pointed tool to spread the retaining tabs.
6. Remove the memory module 2 by pulling the module away from the slot at an angle.
✎
Memory modules are designed with a notch 3 to prevent incorrect insertion into the memory module slot.
Reverse this procedure to install a memory module.