Select To do this
Built in Device Options
●
Enable/disable the wireless button state (enabled by
default).
●
Enable/disable eMBedded WLAN device radio (select
models only; enabled by default).
●
Enable/disable the eMBedded Bluetooth device radio
(enabled by default).
●
Enable/disable the LAN (enabled by default).
●
Enable/disable LAN/WLAN switching (disabled by
default).
●
Set the wake on LAN state. Options include the
following:
◦
Disabled
◦ Boot to Network
◦
Follow Boot Order
●
Enable/disable the ambient Light Sensor.
● Enable/disable the Notebook Upgrade bay device
(enabled by default).
● Enable/disable the fingerprint device (enabled by
default).
● Enable/disable the integrated camera (enabled by
default).
● Enable/disable the Power Monitor Circuit (enabled by
default).
● Enable/disable the audio device (enabled by default).
●
Enable/disable a modem device (enabled by default).
●
Enable/disable the microphone (enabled by default).
● Enable/disable the speakers and headphones (enabled
by default).
Port Options NOTE: NOTE: All port options are enabled by default.
●
Enable/disable the serial port.
●
Enable/disable the parallel port.
● Enable/disable the flash media reader.
●
Enable/disable the USB port.
CAUTION: Disabling the USB port also disables
MultiBay devices and ExpressCard devices on the
advanced port replicator.
●
Enable/disable the 1394 port.
●
Enable/disable the ExpressCard slot.
● Enable/disable the Smart Card slot.
●
Enable/disable the eSATA port.
118 Chapter 5 Computer Setup
