Creating a custom Windows image 18
To extract these folders from the HP Package Setup window, select Extract. You are prompted to
specify the folder in which you want the files to be extracted.
• CD containing the following required drivers-Download and store the following SoftPaqs on a CD:
o ATI ES1000 graphics driver
o NVIDIA FX graphics driver
o HP NC-Series Broadcom 10GbE Multifunction driver
o HP ProLiant Integrated Lights-Out 2 Management Interface driver
o HP ProLiant iLO 2 Advanced and Enhanced System Management Controller health driver
Optional software
The following software components are optional, and can be downloaded from the workstation blade
software and drivers website:
• CD containing SMH—SMH enables the status of the blade to be remotely monitored.
• CD containing HP Insight Management Agents—The Management Agents are required if SMH is
installed, or if HP SIM is used to remotely manage the blade.
Creating the Windows® XP image
1. Connect a monitor, USB hub, keyboard, mouse, diskette drive, and CD/DVD drive to the Local I/O
Cable.
2. Cycle power on the blade to initiate a reboot. When the BIOS console appears, change the BIOS
Remote Console Mode to Setup Mode. Setup Mode causes the NVIDIA graphics adapter and ATI
video adapter to both be visible to the Windows® operating system to ensure correct driver
installation.
3. Boot to the ISO image with both the floppy and diskette driver (HPcissm2) mounted using the virtual
media.
4. Boot the workstation blade from the Windows® XP CD.
5. Immediately after booting the Windows® operating system from the CD, press the F6 key when
prompted. This step is required to install third-party drivers. The HP Smart Array P410i SAS controller
driver is installed.
6. When prompted, press the S key to indicate the availability of a diskette with the P410i SAS
controller driver. Press Enter.
