Hunter Fan 20731 Manual

next previous

45034-01 • 10/23/08 • Hunter Fan Company

4 • Assembling and Hanging the Fan (Low Profile Only)

You can assemble your fan for standard or angled mounting as shown

in Steps 4-1 – 4-6 on the previous page. For low proﬁle mounting

(ceilings less than 8 feet high), see Steps 4-7 – 4-11 on this page.

4-7. Remove the screws from the hanger ball bracket.

4-8. Place the low prole washer from the parts bag into the canopy.

4-9. Place the canopy trim ring and canopy with washer on top of the

fan assembly.

4-10. Align the screw holes in the washer with the holes in the adapter.

Assemble securely with three #8-32 x 3/4” screws.

4-11. Raise the fan and place the hook on the hanger bracket through

the round hole in the rim of the canopy.

WARNING: Fan may fall if not assembled as directed in these

installation instructions.

Step 4-11

Step 4-8 (Detail)

Low Prole Washer

(Not Actual Size)

Steps 4-9 – 4-10

Low Prole Washer

Canopy

Trim Ring

Adapter

#8-32 x 3/4” Screw

Step 4-7