A SERVICE OF

logo

English-42
MAINTENANCE
Replacing the fuel lter
Replace the fuel lter mounted on the supply line after
every 100 hours (once per season) or more frequently
if it is clogged.
Replace the lter as follows:
1. Open the engine cover.
2. Move the hose clamps away from the lter.
Use a pair of at pliers.
3. Pull the lter loose from the hose ends.
4. Push the new lter into the hose ends. Position the
lter with the FLOW arrow pointing up towards
the fuel pump. If necessary, a soap solution can be
applied to the ends of the lter to simplify
assembly.
5. Move the hose clamps back toward the lter.
Cleaning the pulse air lter
1. Open the engine cover.
2. Loosen the four snap catches, remove the cover,
and remove the lter.
3. Blow the lter clean with compressed air.
Replace the lter if it is damaged or cannot be
blown clean.
4. Place the lter back in the cover and fasten the
cover with the snap catches. Close the engine
cover.
Checking the fuel pumps air lter
Check regularly that the fuel pumps air lter is not
clogged by dirt.
Remove the screws and open the pump, no hoses
need be removed.
The lter can be cleaned using a brush, if necessary.
Replace the pump on the console.
8009-146
8009-342
8009-147