A SERVICE OF

logo

63
ENGLISH
ADJUSTING THE TREMOLO ATTACHMENT ANGLE
1 With the guitar tuned correctly, check the angle of the tremolo.
2 If the tremolo is tilted forward, turn the spring adjustment knob located on
the back of the body toward the plus direction to tighten the tremolo
springs.
3 If the tremolo is tilted toward the rear, turn the spring adjustment knob
toward the minus direction to loosen the tremolo springs.
ARM-UP STOPPER
1 Make sure that the tremolo is adjusted so that it is approximately parallel with the surface of the guitar body.
2 Remove the tremolo spring cover, and turn the arm-up stopper knob so that the tip of the arm-up stopper contacts
the tremolo block.
3 Once again make sure that that the tremolo is approximately parallel with the surface of the guitar body, and turn
the spring adjustment knob several times in the plus direction.
STRING HEIGHT ADJUSTMENT