User’s guide 2-55
the duration of a bond between your device and a particular remote
device, see “The Trust tab” on page 2-51.
Bluetooth unit settings
The settings of the Bluetooth unit are controlled from the Bluetooth Control Cen-
ter. From this application, you can enable or disable the Bluetooth unit. Also, the
Bluetooth Control Center icon indicates the state of the Bluetooth unit.
Enabling or disabling the Bluetooth unit
From the Bluetooth Control Center, you can enable or disable the Bluetooth unit.
To enable or disable the Bluetooth unit, do the following
1. Right-click the Bluetooth Control Center icon in the System Tray.
2. Select Enable Bluetooth Transmitter or Disable Bluetooth Transmitter.
Indication of Bluetooth unit state
Located in the Windows taskbar, the Bluetooth Control Center displays one of
three icons to show the state of the Bluetooth unit:
• Disabled: In this state, your Bluetooth device cannot communicate with other
devices.
• Enabled but not transmitting: Your device is ready to communicate with
other devices.
• Enabled and transmitting: Your device is communicating with one or more
remote devices, or an attempt is being made to establish a link.
Disabled
Enabled but not
transmitting
Enabled and
transmitting
