SECTION 5—WHEELCHAIR OPERATION
Pronto® M94™ 42 Part No. 1122145
FIGURE 5.11 Repositioning the Joystick - Van Seat Model
Disconnecting/Connecting the Joysticks
NOTE: For this procedure, refer to FIGURE 5.12.
NOTE: The joystick connector is located at the rear of the seat frame.
SPJ+ Joysticks
Disconnecting
1. Loosen the thumb screws on the joystick connector.
2. Disconnect the joystick connector from the controller connector.
Connecting
1. Align the joystick connector with the controller connector.
2. Secure the joystick connector to the controller connector using the thumb screws on
the controller connector.
ƽ WARNING
The excess joystick cable must be coiled, and tie-wrapped to the rear of the seat
frame to ensure that cable does NOT become entangled or damaged during normal
operation of seating system - otherwise injury or damage may result.
3. If necessary, coil and tie wrap excess joystick cable to rear of seat frame.
FIGURE 5.12 Disconnecting/Connecting the Joysticks - SPJ+ Joysticks
Hex Mounting Screws
Locknuts
Adjustment
Lock Lever
Joystick Mounting Tube
Mounting
Bracket
Spacers
Arm Frame
Joystick
Connector
Light Grey Collar
Controller
Connector
