VM8514
• BASS: Turn the VOL/SEUMENU rotary encoder (2) to adjust the bass
level from "+7" to "-7".
• TREBLE: Turn the
VOL/SEUMENU rotary encoder to adjust the treble
level from "+7" to "-7".
• BALANCE: Turn the
VOL/SEL/MENU rotary encoder to adjust the balance
from "R16" (full right) to
"l16"
(full left).
• FADER: Turn the
VOL/SEL/MENU rotary encoder to adjust the fader from
"F16" (full front)
to
"R16" (full rear).
The unit automatically saves your changes and exits the audio control menu
after five seconds
of
inactivity.
Menu
Operation
Press
and
hold the VOUSEUMENU button (2) for more than two seconds to
access the SETTING MENU. Press the
VOL/SEUMENU button to move
through the following menu options: Equalizet,
loud
Set, Beep Set, 12/24
Mode (clock), Mirror Image, Vol Mode, A-VOL, Sub
lPF
and Area Set. The
following procedures assume you have already accessed the menu.
Press the
VOUSEUMENU button to select the highlighted setting and move
to the next menu option.
Equalizer
The Equalizer function applies preset sound effects to the unit's audio output
signal. Turn the rotary encoder to select from the following equalizer options: .
"Off", "Rock", "Hip Hop", "Dance" and "Acoustic". With the equalizer function
activated, if bass or treble is adjusted, the EQ Mode will revert to "Off".
When the equalizer function is activated, the most recently selected
bassI
treble levels cannot be adjusted. When the equalizer function is not active, the
unit will return to the most recently selected bass and treble levels.
Loud Set
When listening to music at low volumes, this feature will selectively boost
certain bass and treble frequencies.
"Off"
is the default setting. Turn the rotary
encoder to select "On".
Beep Set
The beep tone feature allows the selection
of
an audible beep tone to be heard
each time the menu is accessed. "On" is the default setting. Turn the rotary
encoder to select "Off'.
12/24 Mode
This option allows selection
of
a 12 hour or 24 hour clock format. "12 Hours" is
the default setting. Turn the rotary encoder to change to the 24 hour clock
format.
11
