VM8514
• Some mobile phones (like Sony Ericsson) may have a "Power Saving
Mode" option. PLEASE DO NOT use the power saving mode with the
VM8514.
• Before accepting or making a call, make sure your mobile phone's
"Bluetooth function" is turned on.
•
To
ensure the best conversation quality/performance, stay within one
meter
of
the BTM 15 when talking.
• Phone
Book
direct
searching
through
the head
unit
is
only
available
if
the
mobile
phone
supports
Phone
Book
Download.
If
the feature is
not supported, the head unit will display "Phone book not provided by this
phone" when
an
attempt is made to download a phone book.
Hands
Free
Profile
(HFP)
To
use a phone wirelessly with this unit, it is necessary to first establish a
connection using Bluetooth wireless technology. Connection
is
normally
established using HFP (Hands Free Profile), which gives you full control
of
functions available on the telephone source. However, depending on your
phone, the connection may be made using HSP (Head Set Profile), making
some functions unavailable. This is a limitation
of
your phone, not the VM8514.
Since there are a number
of
Bluetooth mobile phone implementations
available on the market, operations with your Bluetooth mobile phone using
this unit vary greatly.
Please refer
to
the instruction manual that came with your Bluetooth mobile
phone along with this manual while operating your phone with this unit.
Pairing
the
Bluetooth
System
with
Your
Mobile
Phone
and
Head
Unit
1.
Press the SRC button on the front panel (6) or remote control (14) and
select SOURCE
»
BT.
2.
Press the 2/INT button (9) to initiate the pairing process. Keep the mobile
phone within 2 meters
of
the head unit when pairing.
(To
terminate the
pairing process, press the INT button again.)
3.
Select the Bluetooth setup option on the mobile phone
to
be paired
(please refer to the phone's instruction manual to learn how to enter
Bluetooth setup, turn Bluetooth on/off, and perform pairing).
NOTE: Some
phones
require a
Il
pass
key"
or
pairing
code to connect.
If
your
phone
requires a
pass
key
or
pairing
code,
you
will
need
to
enter
this
number
in the Pairing Code
field
under
the
Bluetooth
SETUP menu.
The default
pairing
code
for
many
phones
is
110000".
The
default
code
for
the VM8514
is
111234".
See
IIS
e
t
PinCode"
on
page
40
for
instructions
on
entering a new
pin
code.
32
