20 EN
Menus For Detailed Adjustment
The “DISPLAY” settings except (“CLOCK ADJ.”, “WIDE TV” and “LCD BRIGHT”) are effective
only for shooting.
Menus Settings: [ ] = Factory-Preset
CAMERA
WIND CUT [OFF]: Disengages the function.
ON: Helps cut down on noise created by wind. The “ ” indicator
appears. The quality of the sound will change. This is normal.
RECORDING
REC MODE [SP]: To record in the SP (Standard Play) mode. (SP indicator does not
appear on the screen).
LP: Long Play - more economical, providing 1.5 times the recording
time.
Note:
During playback of a tape recorded on another camcorder, blocks of noise may
appear or there may be momentary pauses in the sound.
SOUND
MODE
[12BIT]: Enables video recording of stereo sound on four separate
channels. (Equivalent to the 32 kHz mode of previous models).
16BIT: Enables video recording of stereo sound on two separate
channels. (Equivalent to the 48 kHz mode of previous models).
Menus Settings: [ ] = Factory-Preset
DISPLAY
ON SCREEN LCD: Keeps the camcorder’s display (except the date, time and time
code) from appearing on the connected TV screen.
[LCD/TV]: Makes the camcorder’s display appear on screen when the
camcorder is connected to a TV.
DATE/TIME [OFF]: The date/time does not appear.
AUTO: Display the date/time for approx. 5 seconds when the camcorder
is turned on.
ON: The date/time is always displayed.
TIME CODE [OFF]: Time code is not displayed.
ON: Time code is displayed on the camcorder and on the connected TV.
Frame numbers are not displayed during recording (੬
15).
WIDE TV To enable your TV to display images in 16:9 wide mode, set the TV
screen size correctly.
[ON] 16:9: For TV with an aspect ratio of 16:9 (16:9 indicator only appear
on the screen).
OFF 4:3: For TV with an aspect ratio of 4:3.
LCD BRIGHT ੬ 13, “Brightness Adjustment Of The Display”.
LCD
BACKLIGHT
[AUTO]: Brightness of the LCD Backlight is automatically
adjusted to compensate for the indoor/outdoor
brightness of your surrounding.
BRIGHT : Brightness of the LCD backlight is increased.
STANDARD : Standard brightness is maintained.
Menus For Detailed Adjustment
GR-D850AA_EN.book Page 20 Thursday, October 18, 2007 5:26 PM
