EN 33
ENGLISH
* The camcorder turns off automatically. Re-check if the indication clears. When it does, you can resume
using the camcorder. If the indication remains, consult your nearest JVC dealer.
Warning Indication Meaning / Remedy
● Displays the battery remaining power.
● As the battery power comes close to nil, the battery remaining power
indicator blinks. When the battery power is exhausted, power turns
off automatically.
SET TO MANUAL MODE
● Appears when you attempt to change “Menu Settings”, “Backlight
Compensation” or “Manual Focus” while in AUTO mode A (੬ 15).
TAPE END
● Appears when the tape ends during recording or playback.
LENS CAP
● Appears for 5 seconds after power is turned on if the lens cap is
attached or when it is dark.
SET DATE/TIME!
● Appears when the date/time is not set (੬ 12).
● The built-in clock battery has run out and the previously set date/time
has been erased. Consult your nearest JVC dealer for replacement.
●
Appears if a tape is loaded while the Power Switch is set to
“REC”
.
● Blinks when no tape is loaded.
CHECK TAPE’S ERASE
PROTECTION TAB
● Appears when the erase protection tab is set to “SAVE” while the
Power Switch is set to “REC”.
UNIT IN SAFEGUARD
MODE REMOVE AND
REATTACH BATTERY
OR DC PLUG
● Error indications (01, 02 or 06).
Remedy: Remove and reattach the power supply or battery*.
UNIT IN SAFEGUARD
MODE EJECT AND
REINSERT TAPE
● Error indications 03 or 04.
Remedy: Eject the cassette and re-insert*.
High
Exhausted
Troubleshooting
GR-D850AA_EN.book Page 33 Thursday, October 18, 2007 5:26 PM
