![](https://pdfstore-manualsonline.prod.a.ki/pdfasset/c/bc/cbcfd91b-f0f1-402a-88ca-653818096f9f/cbcfd91b-f0f1-402a-88ca-653818096f9f-bgf.png)
SPECIFICATIONS
Ⅲ Type : Color video monitor
Ⅲ Color system : NTSC (3.58), PAL
Ⅲ Picture tube : 13” measured diagonally,
90° deflection, in-line gun,
trio-dot type (phosphor dot-trio
pitch 0.28 mm)
Ⅲ Effective screen size : Width 11-1/8”(280.8 mm)
Height 8-3/8” (210.6 mm)
Diagonal 13-1/4” (335.4 mm)
Ⅲ Scanning frequency : (H) 15.734 kHz (NTSC)
15.625 kHz (PAL)
(V) 59.94 Hz (NTSC)
50 Hz (PAL)
Ⅲ Horizontal resolution : 750 TV lines or more
(Y/C input mode)
Ⅲ Input terminals
VIDEO A : Composite video:
1 line, BNC connector x 2,
1 V(p-p), 75 Ω, negative sync
(bridge connection possible,
auto termination)
VIDEO B : Composite video:
1 line, BNC connector x 2,
1 V(p-p), 75 Ω, negative sync
(bridge connection possible,
auto termination)
Y/C-separated:
1 line, mini-DIN 4-pin
connector x 2
Y: 1.0 V(p-p), 75 Ω
C (BURST): 0.286 V(p-p),
75 Ω (NTSC)
0.3 V(p-p), 75 Ω (PAL)
(bridge connection possible,
auto termination)
AUDIO A : 1 line (monaural), RCA pin x 2
0.5 V(rms), high-impedance
(bridge connection possible)
AUDIO B : 1 line (monaural), RCA pin x 2
0.5 V(rms), high-impedance
(bridge connection possible)
REMOTE INPUT A/B : 1 line, RCA pin x 1
REMOTE ASPECT : 1 line, RCA pin x 1
Ⅲ Audio power output : 1 W (monaural)
Ⅲ Built-in speaker : 3-1/8” (8 cm) round x 1
impedance of 8 Ω
Ⅲ Environmental
conditions : Operation temperature:
0 °C – 40 °C
Operation humidity:
20 % – 80 % (non-condensing)
Ⅲ Power requirements : 120 V AC, 50 Hz/ 60 Hz
Ⅲ Power consumption : 1.1 A (120 V AC)
Ⅲ Dimensions : Width 13-5/8”(346 mm)
Height 12-1/4”(310 mm)
Depth 14-7/8”(375 mm)
Ⅲ Weight : 29.5 lbs (13.4 kg)
Ⅲ Accessory : AC power cord [7.9ft (2.4m)] x 1
* Illustrations used in this manual are for explanatory purposes only. The appearance of the actual product may differ slightly.
* Dimensions and weight are approximate.
* E. & O. E. Design and specifications subject to change without notice.
15
Pin No. Signal
1 GND (Y)
2 GND (C)
3Y
4C
Ⅵ Y/C (Mini DIN 4 pin) terminal
specification
24
1
3
24
1
3
OUT
IN
Y/C