29
[Number of] seconds pre/post recordings on motion/
event:
You are able to store recordings from periods preceding
and following detected motion and/or specified events.
Specify the number of seconds for which you want to store
images from before and after the recording. Please do not
set it at 0 (zero) second.
If Offline is selected in [Scheduler], images will not be
recorded.
Manual recording, emergency recording and recording
with EXT REC input will not be effected.
● Database Settings
Lets you specify the Database Settings. ( Page 56)
● Motion Detection Settings
Motion Detection:
Lets you specify two parameters for motion detection,
[Sensitivity] and [Threshold]. ( Page 54)
Motion Color:
Lets you specify the color to be used for highlighting
detected motion.
● Exclude Regions Settings ( Page 54)
Lets you specify Exclude Regions Settings, certain areas of
the camera’s images in which motion detection is disabled.
Region Color:
This button is disabled.
● Image Quality
Lets you specify image resolution and quality-related
settings.
● Event Notifications
Lets you select events for triggering event indications.
( Page 52)
● Outputs
Let you specify output settings. ( Page 53)
● PTZ Preset Positions
Lets you specify preset positions and patrolling. ( Page 45)
When a configurable camera is selected, this button is
displayed on the right side of the [Output] button.
CAUTION
• When the recording program (recording server) is
operating, the [PTZ Preset Position] button is disabled.
Pause the recording server by clicking the [Service
Manager] button in the [Camera Record Setting] window
( Page 38), and then click the [Pause] button.
• The video or audio will not be recorded while the
recording program (recording server) is paused. Also, the
live images to the surveillance computer are turned off.
• In recording control mode, images will not be recorded
during the offline period specified in the [Scheduler]
settings even when [Always] is selected in [When to store
images].
• Clicking [Cancel] does not cancel image quality and
settings made in another window.
Setting the image quality
When adjusting camera settings, you are able to view the
effect of your settings by clicking the [Preview] button.
1 Select [Camera Record Setting] from the [Main
Menu].
2 Select the camera(s) from the [Device Manager]
and click [Camera Setting].
[Camera Setting] window will be displayed.
3 Click [Image Quality].
[Configure Device] window will be displayed.
CAUTION
• It is recommended to set the image quality to
approximately 24KB. Specifying a higher image quality
may affect the sound.
Note
• For detailed information, please refer to the user manual
of the cameras.
• The appearance of the [Configure Device] window
depends on camera model.
☞
☞
☞
☞
☞
☞
☞
Example of the [Configure Device] window
