29
Other
Specifications
Caution : Read this page carefully to ensure safe
operation.
Notes
1.KENWOOD follows a policy of continuous advancements in development. For this reason specifications may be changed without notice.
2.The full performance may not be exhibited in an extremely cold location (under a water-freezing temperature).
AUDIO section (KRF-V7030D/V6030D)
Rated power output during STEREO operation
DIN/IEC (DIN 1kHz, 0.7% T.H.D.,at 4 Ω ............... 100 W + 100 W
Effective power output during SURROUND operation
FRONT (1kHz, 0.7% T.H.D. at 4 Ω, one channel driven)
.............................................................................. 100 W + 100 W
CENTER (1kHz, 0.7% T.H.D. at 4 Ω, one channel driven)
............................................................................................. 100 W
SURROUND (1kHz, 0.7% T.H.D. at 4 Ω, one channel driven)
.............................................................................. 100 W + 100 W
Total harmonic distortion.........................0.055% (1 kHz, 50W, 4 Ω)
Frequency response (IHF '66)
CD ............................................. 13 Hz ~ 53 kHz, +0 dB, –3.0 dB
Signal to noise ratio (IHF’66)
PHONO (MM)........................................................................75 dB
CD .........................................................................................91 dB
Input sensitivity / impedance
PHONO (MM).........................................................2.5 mV / 27 kΩ
CD .........................................................................200 mV / 47 kΩ
MONITOR IN (KRF-V6030D:VIDEO2/MONITOR)
..............................................................................200 mV / 47 kΩ
Output level / impedance
TAPE REC ..............................................................200 mV / 1 kΩ
MONITOR OUT (KRF-V6030D:VIDEO2/MONITOR)
................................................................................200 mV / 1 kΩ
PRE OUT (SUBWOOFER)......................................... 2 V / 2.2 kΩ
Tone control
BASS .............................................................. ±10 dB (at 100 Hz)
TREBLE.......................................................... ±10 dB (at 10 kHz)
AUDIO section (KRF-V5030D/V4530D)
Rated power output during STEREO operation (KRF-V5030D)
DIN/IEC (DIN 1 kHz, 0.7%, 4Ω) ............................... 80 W + 80 W
Rated power output during STEREO operation (KRF-V4530D)
DIN/IEC (DIN 1 kHz, 0.7% THD, 4Ω)....................... 60 W + 60 W
Effective power output during SURROUND operation (KRF-V5030D)
FRONT (1kHz, 0.7% T.H.D. at 4 Ω, one channel driven)
.................................................................................. 80 W + 80 W
CENTER (1kHz, 0.7% T.H.D. at 4 Ω, one channel driven)
............................................................................................... 80 W
SURROUND (1kHz, 0.7% T.H.D. at 4 Ω, one channel driven)
.................................................................................. 80 W + 80 W
Effective power output during SURROUND operation (KRF-V4530D)
FRONT (1kHz, 0.7% T.H.D. at 4 Ω, one channel driven)
.................................................................................. 60 W + 60 W
CENTER (1kHz, 0.7% T.H.D. at 4 Ω, one channel driven)
............................................................................................... 60 W
SURROUND (1kHz, 0.7% T.H.D. at 4 Ω, one channel driven)
.................................................................................. 60 W + 60 W
Total harmonic distortion (KRF-V5030D)
.............................................................0.055% (1 kHz, 40W, 4 Ω)
Total harmonic distortion (KRF-V4530D)
...............................................................0.04% (1 kHz, 30W, 4 Ω)
Frequency response (IHF '66)
CD ............................................. 13 Hz ~ 53 kHz, +0 dB, –3.0 dB
Signal to noise ratio (IHF’66)
PHONO (MM)........................................................................75 dB
CD .........................................................................................91 dB
Input sensitivity / impedance
PHONO (MM).........................................................2.5 mV / 27 kΩ
CD .........................................................................200 mV / 47 kΩ
MONITOR IN (VIDEO2/MONITOR) .....................200 mV / 47 kΩ
Output level / impedance
TAPE REC ..............................................................200 mV / 1 kΩ
MONITOR OUT (VIDEO2/MONITOR) ...................200 mV / 1 kΩ
PRE OUT (SUBWOOFER)......................................... 2 V / 2.2 kΩ
Tone control
BASS .............................................................. ±10 dB (at 100 Hz)
TREBLE.......................................................... ±10 dB (at 10 kHz)
DIGITAL AUDIO section
Sampling frequency ......................32 kHz, 44.1 kHz, 48 kHz, 96kHz
Input level / impedance / wave length
Optical .............................(-15 dBm ~ -21 dBm), 660 nm ±30nm
Coaxial ................................................................. 0.5 Vp-p / 75 Ω
VIDEO section
VIDEO inputs / outputs
VIDEO (composite)............................................ 1 Vp-p / 75 Ω
S VIDEO (KRF-V7030D only)
(luminance signal) ................................ 1 Vp-p / 75 Ω
(chrominance signal).....................0.286 Vp-p / 75 Ω
FM tuner section
Tuning frequency range ................................... 87.5 MHz ~ 108 MHz
Usable sensitivity (DIN at 75 Ω)
MONO .........................1.2 µV/13.2 dBf (40 kHz dev. S/N 26 dB)
STEREO ...................... 45 µV/42.1 dBf (46 kHz dev. S/N 46 dB)
Total harmonic distortion (1 kHz)
MONO ........................................................ 0.2% (65.2 dBf input)
STEREO .................................................... 0.8% (65.2 dBf input)
Signal to noise ratio (DIN weighted)
MONO ...................................65 dB (40 kHz dev.65.2 dBf input)
STEREO ..............................60 dB (46 kHz dev. 65.2 dBf input)
Stereo separation (DIN 1 kHz)...................................................36 dB
Selectivity (DIN±300 kHz) ..........................................................64 dB
Frequency response ................. (30 Hz ~ 15kHz), +0.5 dB, –3.0 dB
AM tuner section
Tuning frequency range ................................... 531 kHz ~ 1,602 kHz
Usable sensitivity ................................................. 16 µV / (600 µV/m)
Signal to noise ratio (30% mod. 1 mV input)...........................50 dB
GENERAL
Power consumption
KRF-V5030D ....................................................................... 220 W
KRF-V7030D/V6030D ......................................................... 250 W
AC outlet
SWITCHED ...................................................... (total 90 W max.)
Dimensions ...................................................................... W : 440 mm
H : 143 mm
D : 400 mm
Weight ......................................................................................... 8.9 kg
