Tuning a RADIO Station
1. Press the FUNCTION button repeatedly
until “TUNER” is shown.
2. Press the BAND / FOLDER button to
selectthedesiredfrequencyband(FMorAM).
3. Press the F - SKIP or B - SKIP
buttonasmanytimesasrequiredto
tune into the desired station.
4. Press and hold the F - SKIP or B - SKIP
button for more than 1 second ,
scanningstartsautomaticallyandthetunerwillstop
attherstreceivablebroadcaststation.
5. Tostopautotuning,presstheF-SKIP
orB-SKIPbuttonagain.
POWER SUPPLY
USING HOUSE CURRENT
Beforeuse,checkthattheratedvoltageofyourunitmatches
yourlocalvoltage.
Note:plugisusedasthedisconnectdevice.
the disconnect device shall remain readily operable.
USING BATTERIES
Disconnect the AC power cord from
the AC inlet of the unit. Battery power
is cut automatically by the cord while
it is connected.
Insert8UM-2(sizeC)batteries.
battery door
When the volume decrease,
or the sound distorts,
replace all of the batteries
with new ones.
To AC socket
To AC outlet
GB 2
ADJUSTING THE SOUND
Press volume +/- to adjust the volume level.
FOR PRIVATE LISTENING
Plugheadphones(ø3.5mmstereomini-plug)intothe
PHONESjack.Whenheadphonesarepluggedin,the
speakers will automatically be disconnected.
VOLUME
PressthePOWER/STANDBYbuttontoturntheaudioon.Tochangetheaudiomodebetween,
CD , UDISK , SD/MMC , IPOD , AUX and TUNER, press the FUNCTION button while the power is on.
The audio mode will be displayed.
Power will be cut off automatically when the CD, MP3 and USB functions are in stop mode for
15 minutes.
TURN ON / OFF THE SYSTEM
Selecting FM Stereo/Mono mode
1. To select FM stereo/mono mode, press the STEREO/
MONO button on the remote control.
2. The “STEREO” icon will be on when the received
station is broadcasted
in Stereo.
3. To select mono mode, press STEREO / MONO button
again.
4. The “STEREO” icon will never turn on in FM MONO
mode.
TUNER OPERATION
VOLUME
battery door
Insert3LR03(sizeAAA)batteries.
Back up Batteries for the clock
FUNCTION
BAND/FOLDER/
I-MENU
FUNCTION