A SERVICE OF

logo

2-26 Service Manual
5016-001
87 Fuser
Exhausted
This message indicates a
new fuser kit must be
installed. If you do not
have the fuser kit, order it
now.
Press
Go to clear the
message and continue
printing. The fuser
exhausted intervention
message is posted every
time the printer power is
turned on.
When a new fuser is
installed, you must reset the
fuser counter to zero. To
reset the fuser counter:
1. Turn the printer off.
2. Press and hold the
Select
and
Return buttons on
the operator panel while
turning the printer on. The
Configuration Menu
displays on the operator
panel.
3. Press
Menu> or <Menu
until
Reset Fuser Count
appears on the second
line.
4. Press
Select to reset the
fuser counter to zero.
88 Color Low This message indicates
the color print cartridge
indicated is nearing its
end of life or empty
condition. If you do not
have an appropriate extra
print cartridge, order it
now.
Press
Go to clear the
message and continue
printing. The
Supplies
status message displays
with the
Ready, Power
Saver
, Busy and Waiting
messages, unless another
status message of higher
priority is posted, or until
you replace the print
cartridge.
88 Color Cartridge
Empty
The printer has detected
the specified print
cartridge is completely out
of toner.
You must install a new print
cartridge before you can
continue printing.
Message Status Action