A SERVICE OF

logo

Setting Up Your Printer
2-4
The Lexmark Z82 printer has two interfaces for wide connectivity; parallel
and USB. If you are running Windows 98 or higher and your computer is
equipped with a USB port, see page 2-6 for connection.
To prevent malfunction, it is strongly recommend that you use
an IEEE 1284-compliant parallel cable with the printer.
1
Check that both the printer and the computer are powered
off and disconnected from the power point.
2
Plug one end of the parallel cable into the connector on the
rear of the printer.
C
onnecting the Printer Cable
Chapter 2
Parallel cable connection