If you choose to lock the buttons on the
control assembly to prevent tampering, this
function may be selected.
• Child Lock can be set by pressing and holding the
SPIN button and TIME DELAY button
simultaneously.
•
When child lock is set, all buttons are inoperable.
• To deactivate Child Lock system, press and hold
the SPIN and TIME DELAY button
simultaneously again.
• To change to the desired program, whilst in child
lock mode.
1. Press and hold both SPIN and TIME DELAY
together once again.
2. Press the START/PAUSE button.
3. Select the desired program and press the
START/PAUSE button again.
• The child lock can be set at any time and it is
automatically canceled when operational errors
occur. Also Child Lock works when power is off.
1. Child Lock
TIME DELAY
1. Time Delay
Preparing washing before starting “Time
Delay”
- Turn on the water tap.
- Load laundry and close the door.
- Place the detergent and fabric softener in
the drawer.
• How to set “TIME DELAY”
- Press POWER button.
- Turn the PROGRAM dial to select
the program you require.
- Press TIME DELAY button and set the
desired time.
- Press the START/PAUSE button.
(“:” blinks.)
• If TIME DELAY button is pressed, “3:00” is
displayed. The maximum delayed time is
19:00 hours and the minimum time is 3:00
hours.
• Each pressing of the button advances on
time delay by one hour.
• To cancel the time delay, press the
POWER button.
• TIME DELAY is ‘expected time’ from the
present to the completion of washing cycle
or selected process (Wash, Rinse or Spin).
• According to the condition of water supply and
temperature, the delayed time and the actual
washing time may vary.
