Chapter 3
Advanced Configuration
30
Wireless-G Broadband Router with 2 Phone Ports
remove a DHCP client, click Delete. To retrieve the
most up-to-date information, click Refresh. To exit
this screen and return to the Local Network screen,
click Close.
Status > Wireless Network
The Wireless Network screen displays information about
your wireless network(s).
Status > Wireless Network
Wireless Network
Dynamic Channel Selection The setting is displayed.
Channel The channel of the wireless network(s) is
displayed.
Mode The wireless mode is displayed.
Wireless Network 1-2
Status information for each wireless network is displayed.
Wireless MAC Address The wireless MAC address of the
Router’s local, wireless interface is displayed.
Network Name (SSID) The network name, which is also
called the SSID, is displayed.
Security The wireless security method is displayed.
SSID Broadcast The status of the SSID Broadcast feature
is displayed.
Access to the Voice Screens
There are two level of access, user and Admin Login. When
you click the Voice tab, the Info screen is automatically
displayed. If you set a User Password on the System screen,
then you will be asked to enter it before the Info screen is
displayed.
The Admin Login allows access to more advanced settings.
To access administrative screens, click Admin Login, and
enter the user name and password provided by your ITSP.
Contact your ITSP for more information. (The factory
default Admin Login name and password are admin.)
NOTE: In most cases, you do not need to use
the administrative screens. Contact your ITSP for
more information.
Voice > Info
The Info screen displays Voice over Internet Protocol (VoIP)
information about the Router.
Voice > Info
Product Information
Product Name The model number of the Router is
displayed.
Serial Number The serial number of the Router is
displayed.
Software Version The version number of the Router
software is displayed.
