Chapter 3
Advanced Configuration
33
Wireless-G Broadband Router with 2 Phone Ports
Block Last Caller Enter the ID of the caller blocked via
the Block Last Caller service.
Accept Last Caller Enter the ID of the caller accepted via
the Accept Last Caller service.
Speed Dial Settings
Speed Dial 2-9 Enter the phone number for each Speed
Dial setting.
Supplementary Service Settings
CW Setting Select whether you want to use the Call
Waiting feature for all calls, yes or no. The default is yes.
Block CID Setting Select whether you want to block
Caller ID for all calls, yes or no. The default is no.
Block ANC Setting Select whether you want to block
anonymous calls, yes or no. The default is no.
DND Setting Select whether you want to use the Do Not
Disturb (DND) feature, yes or no. The default is no.
CID Setting Select whether you want to enable Caller ID
generation, yes or no. The default is yes.
CWCID Setting Select whether you want to enable Caller
ID for Call Waiting, yes or no. The default is yes.
Dist Ring Setting Select whether you want to use the
Distinctive Ring feature, yes or no. The default is yes.
Message Waiting Select whether you want to use the
Message Waiting feature, yes or no. The default is no.
Distinctive Ring Settings
Ring1-8 Caller Enter the caller number pattern to play
Distinctive Ring/Call Waiting Tone (1-8).
Ring Settings
Default Ring Select the default ringing pattern for all
callers. The default is 1.
Default CWT Select the default CWT pattern for all callers.
The default is 1.
Hold Reminder Ring Select the ring pattern that will
remind you of a call on hold when the phone is on-hook.
The default is 8.
Call Back Ring Select the ring pattern for call back
notification. The default is 7.
Cfwd Ring Splash Len Enter the duration of the ring
splash when a call is forwarded. The range is 0 to 10.0
seconds. The default is 0.
Cblk Ring Splash Len Enter the duration of the ring
splash when a call is blocked. The range is 0 to 10.0
seconds. The default is 0.
VMWI Ring Splash Len Enter the duration of the ring
splash when new messages arrive before the VoiceMail
Waiting Indication (VMWI) signal is applied. The range is 0
to 10.0 seconds. The default is 0.
Click Save Settings to apply your changes, or click Cancel
Changes to cancel your changes.
Voice > Admin Login
The Admin Login allows access to more advanced settings.
To access administrative screens, click Admin Login, and
enter the user name and password provided by your ITSP.
Contact your ITSP for more information. (The factory
default Admin Login name and password are admin.)
NOTE: In most cases, you do not need to use
the administrative screens. Contact your ITSP for
more information.
