A SERVICE OF

logo

MERLIN LEGEND Communications System Release 6.0
System Programming
555-660-111
Issue 1
February 1998
Programming Procedures
Page 4-115DS1 Facilities
4
Factory Setting Robbed bit
Valid Entries Robbed Bit, Common Channel
Inspect No
Copy Option No
Console Procedure
Dial slot no.
Select type of signaling
PC Procedure Type slot no. Select type of
signaling
Procedure: Signaling Mode 4
Console Display/Instructions Additional Information PC
Select the Lines and Trunks menu.
Select Loop-Start/Ground-Start/DS1.
Enter the slot number in the control unit that contains the 100D module
(
nn
= 1 to 17).
Dial or type [
nn
].