MERLIN LEGEND Communications System Release 6.0
System Programming
555-660-111
Issue 1
February 1998
Programming Procedures
Page 4-173PRI Facilities
4
Summary: B-Channel Groups 4
Programmable by System Manager
Mode Hybrid/PBX, Key
Idle Condition Not required
Planning Form Form 3b, Incoming Trunks: DS1 Connectivity (100D module)
Factory Setting Not applicable
Valid Entries Group numbers (1 to 80)
Inspect Yes
Copy Option No
Console Procedure To program a single line/trunk:
→ → → →
Dial group no.→ →Dial B-channel slot and port nos.→
→ →Dial group no.→ →E →
Dial line/trunk no.→ → → →
To program a block of lines/trunks:
→ → → →
Dial group no.→ →Dial B-channel slot and port no.→
→ →Dial group no.→ →Select specific
lines/trunks
→Toggle LED On/Off→ → →
PC Procedure To program a single line/trunk:
→ → → →Type group no.→Type B-channel
slot and port nos.
→ →Type group no.→ → →
Type line/trunk no.→ → → →
To program a block of lines/trunks:
→ → → →Type group no.→Type B-channel
slot and port nos.
→ →Type group no.→ →
Select specific lines/trunks→Toggle letter On or Off→
→ →
