Cajun M770 ATM Manager User’s Guide 21
Chapter 5
Fault Management
Fault management consists of the following:
•
Configuring Traps
- Defining the types of traps that are sent to the managers
and the event log.
•
Viewing Traps
- Viewing the traps sent by the agent.
In UNIX and Windows NT:
•
Severity Degrees
- Defining, accessing and understanding severity degrees.
Configuring Traps
A trap is an SNMP message sent by the agent to its managers. Trap messages may
appear in the affected port configuration windows of the management stations
listed in the Managers Table. You can set the types of traps that the agent forwards
to the management station which you are configuring.
To configure traps:
1Open the
Configuration
menu and select
Traps
. The Traps Configuration dialog
box appears.
Figure 5.1 Traps Configuration Dialog Box
2 Check the check boxes for the types of traps that you want the agent to forward
to the management station that you are configuring.
3Click
Apply
.
For a full description of the traps in the Traps Configuration dialog box, refer to
Appendix D,
Trap Fields
.
