313
Controls in detail
Loading
Installing the cargo net
Cargo net bar hung up behind the B-pillar
1 Holder
2 Cargo net bar
̈ Hang cargo net bar 2 on holder 1 as
indicated by the arrow.
̈ Push cargo net bar 2 forward into
holder 1 in direction of arrow.
Pulling the cargo net tight
Belt hook attached in the second-row foot-
well
1 Belt hook
2 Cargo tie-down ring
3 Tightening belt
̈ Hook belt hook 1 into cargo tie-down
ring 2 in direction of arrow.
̈ Pull tightening belt 3 by the loose end
in direction of arrow until the cargo net
is pulled tight.
̈ After driving a short distance, make
sure the cargo net is still tight and, if
necessary, pull it tight again.
Loosening the cargo net
Belt hook attached in the second-row foot-
well
1 Buckle
2 Belt hook
3 Cargo tie-down ring
̈ Loosen the tightening belt by pulling
buckle 1 upward in direction of arrow.
̈ Remove belt hook 2 from cargo
tie-down ring 3.
164.boo Seite 313 Freitag, 30. März 2007 12:54 12
