162
Controls in detail
Control system
̈ Press button æ or ç enable or
disable this feature.
When you set this feature to
On
, the time
displayed in the multifunction display is
automatically synchronized with the time
of the COMAND system.
Setting the time (hour)
This function is only available if the func-
tion
Time Synchron. With Head Unit
(
୴ page 161) has been set to
Off
. The time
is then not set automatically by the
COMAND and must be set manually if
required.
̈ Move the selection marker with
the æ or ç button to the
Time
submenu.
̈ Press button j or k repeatedly
until the message
Set Time Hour
appears in the multifunction display.
The selection marker is on the hour
setting.
̈ Press button æ or ç to set the
hour.
Setting the time (minutes)
This function is only available if the func-
tion
Time Synchron. With Head Unit
(
୴ page 161) has been set to
Off
. The time
is then not set automatically by the
COMAND and must be set manually if
required.
̈ Move the selection marker with
the æ or ç button to the
Time
submenu.
̈ Press button j or k repeatedly
until the message
Set Time Minute(s)
appears in the multifunction display.
The selection marker is on the minute
setting.
̈ Press button æ or ç to set the
minutes.
i
For information on setting the time, refer to
the separate COMAND operating instructions.
