5 - 21
CHAPTER5 MEMORIES AND FILES USED FOR CPU MODULE
1
2
3
4
5
6
7
8
5.1 Memories Used for CPU Module
5.1.7 Writing to the Flash card by GX Developer
(4) Precautions
(a) Setting the communication time check period in GX Developer
Since writing a file to the Flash card takes time, set "Check at communication time" in GX Developer to 60
seconds or longer.
If the set time is short, GX Developer may time out.
(b) Writing a file from GX Developer in another station via CC-Link
Since writing a file to the Flash card takes time, make the CPU monitoring time setting (SW000A) of CC-Link to
60 seconds or longer.
(The default value of 90 seconds can be used.)
Remark
For settings of the communication time check period and CPU monitoring time, refer to the following.
GX Developer Version8 Operating Manual
Figure 5.18 Check at communication time setting
Figure 5.19 Writing a file from GX Developer in another station(via CC-Link)
GX Developer in another station
CPU module that writes
files to the Flash card
