MANUAL TRANSMISSION (E-W) -
Differential <F5M41, F5M42>,
Front Differential <W5M42>
22B-15-2
DISASSEMBLY SERVICE POINTS
A
A
"
BALL BEARING REMOVAL <F5M41>
Use the special tool to remove t he ball bearing.
A
B
"
TAPER ROLLER BEARING REMOVAL <F5M42>
Use the special tool to remove the taper roller bearing.
REASSEMBLY SERVICE POINTS
"
A
A
SPACER / SIDE GEAR / WASHER / PINION /
PINION SHAFT INSTALLATION
(1) After a spacer has been mounted on the back surface
of the side gear, install th e side gear in the differential
case.
NOTE
When a new side gear is to be installed, mount a medium
thickness spacer (0.93- 1.00 mm).
(2) Set the washer on the back of each pinion, and put both
pinions simultaneously in mesh with the side gears. While
rotating them, install them in position.
(3) Insert the pinion shaft.
PWEE9508-E
E
Jun. 1998Mitsubishi Motors Corporation Revised
MD998801
MD998801
