![](https://pdfstore-manualsonline.prod.a.ki/pdfasset/0/b0/0b0a1c28-2450-0124-65fa-cd7f117b3c5a/0b0a1c28-2450-0124-65fa-cd7f117b3c5a-bg2.png)
NB600W Super-G Wireless Broadband Gateway User Guide YML775 Rev1
2 www.netcomm.com.au
Legal & Regulatory Information
This manual is copyright. Apart from any fair dealing for the purposes of private study, research,
criticism or review, as permitted under the Copyright Act, no part may be reproduced, stored in a
retrieval system or transmitted in any form, by any means, be it electronic, mechanical, record-
ing or otherwise, without the prior written permission of NetComm Limited. NetComm Limited
accepts no liability or responsibility, for consequences arising from the use of this product.
NetComm Limited reserves the right to change the specifications and operating details of this
product without notice.
NetComm is a registered trademark of NetComm Limited.
All other trademarks are acknowledged the property of their respective owners.
Customer Information
ACA (Australian Communications Authority) requires you to be aware of the following informa-
tion and warnings:
(1) This unit shall be connected to the Telecommunication Network through a line cord which
neets the requirements of the ACA TS008 Standard.
(2) This equipment has been tested and found to comply with the Standards for C-Tick and or
A-Tick as set by the ACA . These standards are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses,
and can radiate radio noise and, if not installed and used in accordance with the instructions
detailed within this manual, may cause interference to radio communications. However,
there is no guarantee that interference will not occur with the installation of this product in
your home or office. If this equipment does cause some degree of interference to radio or
television reception, which can be determined by turning the equipment off and on, we en-
courage the user to try to correct the interference by one or more of the following measures:
• Change the direction or relocate the receiving antenna.
• Increase the separation between this equipment and the receiver.
• Connect the equipment to an alternate power outlet on a different power circuit from that
to which the receiver/TV is connected.
• Consult an experienced radio/TV technician for help.
(3) The power supply that is provided with this unit is only intented for use with this product. Do
not use this power supply with any other product or do not use any other power supply that
is not approved for use with this product by NetComm. Failure to do so may cause damage
to this product, fire or result in personal injury.
Important rules for safe operation
In addition to the careful attention devoted to quality standards on the manufacture of network
products, safety is a major factor in the design of every product. However, safety is your respon-
sibility, too. This section lists the gateway and accessory equipment. Please read them carefully
before operation and using the gateway.
• Read and follow instructions- You should read all the safety and operating instructions be-
fore operating the gateway.
• Retain Instructions- You should save all the safety and operating instructions, for future
reference.