12
WARNING!
Maintenance
• Performing maintenance on the vacuum while it is plugged
into a wall outlet may result in unexpected vacuum
operation, shock and personal injury. Always turn the
vacuum OFF and unplug before performing inspection and
maintenance.
• If the power cord is damaged, it should only be replaced by the
factory or maintenance center or similarly qualied person.
Bag Full Indicator
• The Bag Full Indicator light (C) will turn red when the bag
lls with dirt. There are three conditions that will cause the
indicator light to come on:
1. The bag is full; change the bag.
2. Very ne material (such as powder) have been picked
up, clogging the bag pores; change the bag, even if it
is not full.
3. There is a blockage in the nozzle, hose, tools or at the
bag opening; remove the blockage.
NOTE: The bag full indicator is designed to notify the user
when the lter bag is full. If the lter bag is full of pet hair,
carpet bers, etc., the bag full indicator may not light up due
to sufcient air ow of the lter bag. Discard the used lter
bag and replace with a new one.
CAUTION: The bag full indicator may come on when picking
up ne materials, such as powder, our or cornstarch. These
materials may seal the pores of the lter bag and cause the
lter bag to burst even though the lter bag is only partially
full of dirt. It is recommended to change the lter bag more
often when removing this type of material.
