Features 3-23
3 Features
D
• “DISA1” or “DISA 2” must be assigned to exchange line(s) as the exchange line mode in
programs [414] through [416].
• After the DISA Delayed Answer Time assigned in program [504] expires and a ringback
tone is returned to the caller, a DISA call will be answered. The caller can dial during the
message or after the tone.
• This system can store up to 10 programmable DISA built-in auto attendant numbers in
program [501]. Each number is 1 digit.
• The DISA built-in auto attendant number may be the same as the first digit of other
numbers (extension number, etc.). To avoid confusion, the system waits for the second
digit for a preprogrammed amount of time in program [517] (default: 2 seconds). If the
timer expires, the system will assume that the first digit is a DISA built-in auto attendant
number.
• Only one OGM/FAX Detection Card can be installed .
• Connection Reference
2.15 OGM/FAX Detection Card Installation
• Required System Programming
To enable the DISA feature
[414]–[416] Exchange Line Mode — Day/Night/Lunch
[420] Calling Party Control (CPC) Signal
[500] DISA Incoming Dialling Mode Selection
[501] DISA Built-in Auto Attendant
[502] OGM Mode Selection
[503] FAX Connection
[506] DISA Busy Mode
[510] DISA No Dial Mode
[513] Cyclic Tone Detection
[514] FAX Tone Detection
[516] DISA Incoming Assignment
To set DISA timer values
[504] DISA Delayed Answer Time
[505] DISA Waiting Time after OGM
[517] DISA AA Wait Time
[519] DISA OGM Mute Time
To enable the Intercept Routing feature
[408]–[410] Flexible Ringing Assignment — Day/Night/Lunch
[507] DISA Intercept Mode
[508] DISA Ringing Time before Intercept
[509] DISA Ringing Time after Intercept
[515] Intercept Time for Internal DISA
• Related Feature References
Extension Hunting,
Intercept Routing, Outgoing Message (OGM)
!
!
☞
PSQX1708ZA-04E.QX 99.10.15 10:31 AM Page 23
