26
White balance adjustment
(continued)
pqManual adjustment
(R gain and B gain adjustment)
White balance can be adjusted manually.
When performing the operations
using the wireless remote control
p Steps
1 through 6 represent the procedure for selecting
the “AWB A” or “AWB B” memory. They need not be taken
if a selection has already been made.
1 Select Manual1, Manual2 or Manual3 as the
shooting mode by following the procedure in
“Selecting the shooting modes (scene files)”
(page 11).
Camera
Scene Manual1
Contrast
Picture
Color Matrix
Return
2 Press the [] or [] button to bring the cursor
to “Picture”.
3 Press the [] button.
The “Picture 1/2” sub-menu is displayed.
Picture 1/2
Chroma Level 0
AWB Mode AWB A
R Gain 0
B Gain 0
Detail High
Flesh Tone Mode Off
DNR High
Return
4 Press the [] or [] button to bring the cursor
to “AWB Mode”.
5 Press the [] button.
“AWB Mode” starts blinking.
6 Press the [] or [] button to change the AWB
mode to be used to “AWB A” or “AWB B”, and
press the [] button to enter the selection.
7 Press the [] or [] button to bring the cursor
to “R Gain” or “B Gain.”
8 Press the [] button to make the “R Gain” or
“B Gain” value blink.
9 Press the [] or [] button to change the
“RGain” or “BGain” numerical value, and press
the [] button to enter the setting.
When performing the operations using the controller
When the AW‑RP655 is connected:
1 Press the [R/B GAIN/PED] button several times
so that the “GAIN” item is displayed on the LCD
panel.
2 Adjust the R Gain value using the jog dial (L).
3 Adjust the B Gain value using the jog dial (R).
When the AW‑RP555 is connected:
Refer to the Operating Instructions of the controller.
When the AW‑RP50 is connected:
Refer to the Operating Instructions of the controller.
