32
Sending Faxes
To select the resolution
Select the desired resolution according to the type of
document.
— “
STANDARD”:
For printed or typewritten originals
with normal-sized characters.
— “FINE”: For originals with small printing.
— “
SUPER FINE”:
For originals with very small printing.
This setting only works with other compatible fax
machines.
— “
PHOTO”:
For originals containing photographs,
shaded drawings, etc.
●
Using the “FINE”, “SUPER FINE” or “PHOTO” setting
will increase transmission time.
●
If the resolution setting is changed during feeding, it
will be effective from the next sheet.
Sending a fax manually!
1
Adjust the width of the document guides to
the size of the document.
2
Insert the document (up to 15 pages) FACE
DOWN into the feeder until the unit grasps
the document and a single beep is heard.
Display:
3
If necessary, press u
repeatedly to select the desired setting
(see below).
4
Press q or lift the handset.
/
5
Dial the fax number.
Example:
6
When a fax tone is heard:
Press i, and replace the
handset if you are using it.
OR
When the other party answers your call:
Lift the handset and ask them to press their
start button. When the fax tone is heard, press
i
and replace the handset.
CONNECTING.....
STANDARD
TEL=5678901
TEL=
PRESS NAVI.[
IH
]
TEL=
PRESS STATION OR
STANDARD
To redial the last number
Press RS, then press
i.
●
If the line is busy, the unit will automatically
redial the number up to 2 times.
●
During redial, the following will be displayed.
To transmit more than 15 pages at a time
Insert the first 15 pages of the document. Add
the other pages (up to 15 at a time) before the
last page feeds into the unit.
Convenient way to send a fax
You can dial the fax number before inserting
the document. This is convenient if the other
party’s number is indicated on the document.
1. Enter the fax number.
●
The handset must be on the cradle.
2. Insert the document.
3. Press i.
WAITING REDIAL
Using the auto document feeder
