7. Copy
25
7 CopyCopying
7.1 Making a copy
1 Open the document feeder tray (1), then adjust the
width of the document guides (2) to fit the actual
size of the document.
2 Insert the document (up to 10 pages) FACE DOWN
until a single beep is heard and the unit grasps the
document.
L If the document guides are not adjusted to fit the
document, re-adjust them.
3 If necessary, press {A} or {B} repeatedly to select
the desired resolution.
4 Press {COPY}.
L The unit will start copying.
Note:
L When you copy a multiple-page document which is
longer than A4 size paper (approx. 300 mm), we
recommend you insert one page at a time.
L Any document which can be sent as a fax can also
be copied (page 18).
L The copied recording paper comes out somewhat
longer than the document size.
To select the resolution
Select the desired resolution according to the type of
document.
– “FINE”: For printed or typewritten documents with
small print.
– “SUPER FINE”: For documents with very small print.
– “PHOTO”: For documents containing photographs,
shaded drawings, etc.
L If you select “STANDARD”, copying will be done
using “FINE” mode.
To stop copying
Press {STOP}.
2
1
{STOP}
{A}{B}
{COPY}
FT932_934HK-PFQX2561YA-en.book Page 25 Monday, May 8, 2006 5:05 PM
