Advanced Operation
23
“
FLASH Button
Pressing (FLASH) allows you to use special features of your host PBX
such as transferring an extension call or accessing special telephone
services (optional) such as call waiting.
Selecting the flash time
The flash time depends on your telephone exchange or host PBX. You
can select the following flash times: “80, 90, 100, 110, 200, 250, 300, 400,
600, 700 ms (milliseconds)”. Your phone comes from the factory set to
“600 ms”.
Make sure that a call is not put on hold.
1
Press (PROGRAM).
2
Press (MUTE).
3
Press (2).
≥The current setting is displayed.
4
Press a dialing button ((1) to (0)).
(1) : 80 ms (2) : 90 ms (3) : 100 ms (4) : 110 ms
(5) : 200 ms (6) : 250 ms (7) : 300 ms (8) : 400 ms
(9) : 600 ms (0) : 700 ms
5
Press (PROGRAM).
≥A long beep sounds.
≥The unit will return to the standby mode.
≥If you are connected via a PBX, a longer flash time may be necessary to use
PBX functions (transferring a call, etc.). Consult your PBX installer for the correct
setting.
