Battery Replacement
29
If “” flashes, the battery power is low. Install new batteries. Replace
the batteries within 1 minute to keep the programmed settings.
1. Press down in the direction of the
arrow and remove the cover.
2. Replace the batteries with new ones
using correct polarity (i, j), and close
the cover.
Battery Precautions:
The batteries should be used correctly, otherwise the unit may be damaged by
battery leakage.
—Do not mix different types of batteries.
—Do not charge, short-circuit, disassemble, heat or dispose of in fire.
—Remove all the batteries when replacing.
Note:
—If you do not install the batteries or if the battery power is low, the time will
be shown as “
12-00” and “” will flash. Readjust the time.
—Disconnect the telephone line cord before opening the battery compartment
cover.
—Replace all the batteries once a half year in use of Alkaline batteries, or
misoperation may occur. (When you use Manganese batteries, replace all of
them once in three months.)
—Do not use nickel-cadmium batteries.
≥If the time is shown as “12-00” and “” flashes after replacing the batteries,
readjust the time.
≥Please replace the batteries while the handset is placed on the cradle.
