A SERVICE OF

logo

Open as PDF
next previous
Automatic Dialing
(cont.)
Be sure that the handset is
on
the
cradle,
the
SP-PHONE
indicator
is off and
the
AC adaptor is connected.
When
you
store a
telephone
number into memory,
pressing
the
#,
*, PAUSE
or
FLASH
button count as 1 digit.
Storing telephone numbers for
speed dialing
There are 20 memory stations, each memory
station can be accessed by dialing
2
Press
the
PROGRAM
button.
The MUTE/STORE indicator lights.
Press
the station number
(01-20).
The MUTE/STORE indicator
goes
oul
Dial the telephone
number
that
you
want
to
store.
Up to 16
digits.
Press
the
AUTO/STORE
button
to
store
the number into
memory.
The MUTE/STORE indicator
lights.
To store
other numbers in succession.
repeat from
step 2.
Press
the
PROGRAM
button
after storing
allthe
numbers.
The
MUTE/STORE indicator
goes
out.
digits on
the
dial
key
pad. (01-20)
SC=pnoe
nnvt
1
Storing
telephone
numbers
for
one-touch
dialing
There are 6 direct call buttons.
Each button consists
of upper and
lower memory
locations.
Each location
(upper
and
lower) is capable of storing
16
digits.
(TRANSFER
station
is
capable of storing
30 digits.)
Press the
PROGRAM button.
The MUTFJSTORE
indicator lights.
Press the direct call
button.
The MUTE/STORE
indicator
goes
out.
Dialthe
telephone
number
that
you
want
to store.
Up
to
'16
digits.
Press the AUTO/STORE button
to store
the
number into
memory.
The MUTE/STORE
indicator
lights.
To store
other
numbers
in
succession,
repeat from step 2.
Press the PROGRAM button
after storing
allthe
numbers.
The MUTE/STORE indicator
goes
out.
Using the
LOWER memory
location
Other
telephone
numbers can be stored
into the LOWER
memory locations
of
the same
direct call stations.
In this case, change step
2
of
the above
procedure
by
first
pressing
the LOWER button,
then
press
the direct call button.
W.l.}
ffi-==
no-.tl\"----a
-%-
ry5==
S{nurorsrone
=P€
J
f-==.-sf= PRocRAM
-27 -
-28-