Calling an external party without an outgoing message
Conditions
• An optional OGM/FAX Detection card is necessary for outgoing messages.
• When an incoming call is not answered before the “DISA Ringing Time before
Intercept” (default: 20 seconds) expires, “Intercept Routing” starts or the call will be
disconnected.
• “Intercept Routing” starts after the “DISA Waiting Time after OGM” expires (default:
5 seconds), if nothing has been dialed. The call is disconnected when the “DISA
Ringing Time after Intercept” (default: 20 seconds) expires, or when there is no
destination for “Intercept Routing”.
• This system supports up to ten programmable DISA built-in auto attendant (AA)
numbers. Each number must be one digit. You can access an extension or a ring group
by entering a 1-digit AA number.
• You can store up to four programmable DISA security codes. These codes must have
four digits, and they must be different.
• When the “Outside-to Outside (CO-to-CO) Line Duration Time Limit” expires, both
lines are disconnected unless the caller re-tries or extends the time (default: 10 min.), if
available. A warning tone is sent to both parties fifteen seconds before the time limit.
• If you dial the wrong DISA security code, three beeps will be heard. The call will be
disconnected after three failed attempts. If you enter the security code a second and
third time, you do not need to dial .
