Telephone Features 3-99
3.2 Telephone Features P
Conditions
• This feature will not work if you answer an incoming call or retrieve a call on hold.
• Up to thirty-two digits, consisting of “0 through 9” and “ ”, can be stored. The “ ”
button is used as a PAUSE. However, in the account code verify-all, verify-toll and
forced modes, “ ” is not regarded as a pause.
• An account code must be stored by pressing “ ” and entering the account code after
the line access code in the account code verify-all, verify-toll and forced modes.
• During the waiting time after going off-hook, you can call another party and override
this feature. You can change the waiting time between going off-hook and connecting
with a called line by System Programming.
• A rotary telephone cannot use this feature.
Programming Reference
• System Programming — Installation Manual
[203] Pickup Dial Delay Time
Pickup Dialing (Hot Line) (— Single Line Telephone only)
Allows you to make an outgoing call by just going off-hook.
Storing a phone number
SLT
• You must dial a line access code (9 or 81 through 86) as the first
digit when storing an external party phone number.
SLT
