44
Phonebook
with the Handset
Hot Key Dial
The keypad 1 to 9 function as one-touch dials. You can assign up to 9 caller’s information in the
phonebook as hot key dial. This information can be assigned to keypad 1 to 9.
Make sure that the power is ON (p. 15), and the unit is in the standby mode.
To store an item as hot key
dial
1
Follow steps on Finding an Item in the
Handset Phonebook (p. 39), then press
.
2 Press or until “Reg. To Hot
Key” is displayed, and press .
•If already stored, “ ” will be displayed on
the left of the hot key number.
3 Press or to select a hot key
number, then press .
4 Press or until “Save” is
displayed.
OR
If the hot key number with “ ” is
selected, press or until
“Overwrite” is displayed.
5 Press .
•A beep sounds and “Saved” is displayed.
•After a few seconds, the display will show
the next caller information.
•To return to the standby mode, press
or wait for 60 seconds.
To make a call with hot key
dial
1
Press and hold a hot key number 1 to 9.
•The stored caller information is displayed.
2 Press or .
•The number is automatically dialled.
3 To hang up, press .
To clear a caller information in
the hot key dial
1 Press and hold a hot key number 1 to 9.
•The stored caller information is displayed.
2 Press .
3 Press or until the arrow points
to “Clear”, then press .
•“Clear ?” is displayed.
4 Press or to select “Yes”, then
press .
•A beep sounds and “CLEARED” is
displayed.
•“No Stored Memory” is displayed if
clear all hot key dial.
Reg. To Hot Key
H
Key 1
Key 2
KX-TCD735ALM(E)-2(32~49) 2002.06.21 5:02 PM Page 44
