79
Chapter 5
Answering System
To erase your own greeting message with direct command
During playback your own greeting message, press then .
•A recording of your own greeting message is erased.
•The display will return to “Remote Operation”. To return to the standby mode, press
or wait for 30 seconds.
To set the answering system
ON/OFF
See basic answering system operations (p. 17).
1 Press (INT) then .
2 Press to set ON, or press to set
OFF.
•“[A]” is displayed in the standby mode if
set to ON.
•The display will return to “Remote
Operation”. To return to the standby
mode, press or wait for 30
seconds.
To playback your own greeting
message
1 Press (INT) then .
2 After the function menu is displayed,
press or until the arrow points
to “Play OGM”, then press .
OR
Press .
•A recording of your own greeting message
is played back.
•If your own greeting message is not
recorded, one of 2 pre-recorded greeting
messages is played back.
•The display will return to “Remote
Operation”. To return to the standby
mode, press or wait for 30
seconds.
KX-TCD735ALM(E)-4(76~100) 2002.06.21 5:30 PM Page 79
