Slide 92Slide 92
Mirror Function
New
This feature allows the picture to be rotated 180° horizontally or 180° vertically.
When servicing plasma TVs with horizontal lines, this feature can help to determine if the A board is
causing the problem or not. For vertical lines problems, this feature can help to determine if the
problem is the A board or the panel. The rear cover does not have to be removed to do this.
If the position of the line/lines changes when performing this function, the A board is possibly
defective. If the line/lines do not move:
For horizontal lines check between the panel and the SM board.
For vertical lines, change the panel.
To enter the Mirror Function.
From the Service Mode Menu, select “OPTION”.
Press 3 or 4 to select “MIRROR”.
Press the VOLUME up or down button to change the Mirror’s data.
Data = 00 is the default data (Mirror feature is off)
Data = 01 The picture is flipped 180
° horizontally.
Data = 02 The picture is flipped 180
° vertically
