Panasonic TH-65PV600A Manual

Open as PDF

next previous

Advanced

MENU EXIT

Main menu

Picture menu

Setup menu

Sound menu

Off timer

Ch colour set

Child lock

Side panel

SD card LED

Setup menu

Power save

Off

High

Tuning menu

Access

Off

Teletext

TOP

HDMI setting

Owner ID

Skip

Auto tuning

Manual tuning

Sound system

Colour system

Fine tuning

Sys select

Tuning menu

5.5MHz

Auto

Off

Australia

Manual tuning

Search down/up

Store

Programme down/up

Return

Exit

Manual tuning (Front panel)

, + : Search

TV / AV : Move cursor

STR : To store

F : To exit

5. 5MHz

STR F

/ + / TV / AV

Editing and Setting Channels

Set

manually

Manual

tuning

The current channel settings can be changed according to your needs and reception conditions.

For Auto tuning, see p. 10.

■

To exit

EXIT

•

Editing and Setting Channels

Display the menu

Select "Setup menu"

Select "Tuning menu"

Select the function

Set

Edit

Sound

system

Edit

Colour

system

Small

adjustment

Fine

tuning

Skip the

programme

Skip

Select the programme number

and search through the channel

(Press repeatedly until "Tuning mode" appears)

or (Access Tuning menu)

(Press repeatedly until "Auto tuning" is reached)

or (Searching channels)

For Auto tuning, using the

buttons on the TV

("Tuning mode" on p. 7)

■

To return to TV

If the sound is weak or distorted, change the sound system used for a programme channel. (5.5MHz / 6.5MHz)

Select the channel you want to adjust Set this function

If the image is strange, change the colour system to the correct transmission signal being received. (Auto / PAL /

NTSC 4.43 / NTSC 3.58)

Select the channel you want to adjust Set this function

•

Normally, select "Auto"

For the small adjustments to the tuning of an individual channel (useful for example when weather conditions are

affecting reception quality of a programme)

Select the channel you want to adjust

Set this function

•

To cancel Fine tuning, tune again by Manual tuning

For the skip programme numbers which have no tuning datas

•

This function is only effective when pressing the Programme number up or down button either on the TV or on

the remote control.

Select the channel you want to skip

Set "Skip" to "On"

Store

Programme

number

Channel

Repeat

and

Note

•

If a VCR is

connected with

only the RF

cable, select

programme

number "0".

•

The programme

number blinks.

To freely change settings after Auto setup

(Press repeatedly until "Tuning mode" appears)

or (Access Tuning menu)

(Press repeatedly until "Manual tuning" is reached)

or (Access Manual tuning)

(Programme, Channel (not displayed), Sound system)

(Change programme, Start searching channels, Change sound system)

(Store)

(Repeat)

For Manual tuning, using the buttons on the TV

("Tuning mode" on p. 7)

■

To return to TV

Programme number

(ﬂ ash)

Channel

Sound system

(ﬂ ash)

•

Not available when Child lock

in Setup menu is set (p. 18).

•

Not available when Child lock in Setup menu is set

(p. 18).

access

select

access

select