A SERVICE OF

logo

24
Advanced
25
EXITMENU
RB
SD CARD
RECALL
PHOTO
VIEW MODE
1/19
Filename
100-0001
Date 01/01/2001
Pixel 15X16
Select
Select
SD CARD : Return
Slide show
Exit
View
100-0001 100-0003 100-0004
100-0005 100-0008 100-0009
100-0010 100-0012 100-0016
Cannot
read file
Select
Rotate
Exit
List
100-0001
Interval
Card setup menu
5sec
Repeat
Off
Main menu
Picture menu
Card setup menu
SD CARD
MENU
R
Slide show
R
For details, see p. 25
Viewing SD Card
The still images recorded by the digital camera will be displayed.
View
4
Insert the SD Card
For details on SD Cards,
see p. 34.
Select the photo to be viewed
3
Displayed one at a time
To previous photo
To thumbnail
Rotate 90˚ (clockwise)
To next photo
1
2
Select SD mode (PHOTO VIEW MODE)
select
view
Rotate 90˚
(anti-clockwise)
Operation
guide
(Thumbnail screen)
Caution
During the operation, no signals are output from the monitor output terminals.
"Date" shows the date on which the recording was made by the digital camera. It
shows "**/**/****" when recordings are made without date signal.
To return to
thumbnail screen
SD CARD
To return to TV
EXIT
SD
Card
Label surface
(Photos)
To open
Start Slide show (operate in step )
Slide show settings (operate in step or )
Viewing SD Card (Photos)
Open the cover
Press
Push until a
click is heard
To remove
To insert
Press the centre of the card
Error display
(images that could not be loaded, etc.)
Selected
photo
To display the operation guide
RECALL
Slide show
Select the photo for the rst view Start Slide show
Display the
menu
Select "Card setup menu" Select the functions and set
access
select
"Picture menu" (p. 18)
Menu Item Adjustments / Con gurations (alternatives)
Card setup
menu
Interval Select slide show interval (5 / 10 / 15 / 30 / 60 / 90 / 120sec)
Repeat Slide show repeat (Off / On)
Blue LED
Note
Blue LED lights while SD Card is inserted if set "SD card LED" to "On" in Setup menu (p. 18).
set
select
Cautions in handling SD Card
Do not remove the card while the TV is accessing data (this can damage card or TV).
Do not touch the pins on the back of the card.
Do not subject the card to a high pressure or impact.
Insert the card in the correct direction (otherwise, card may be damaged).
Electrical interference, static electricity, or erroneous operation may damage the data or card.
Back up the recorded data at regular intervals in case of deteriorated or damaged data or erratic operation of the
TV. (Panasonic is not liable for any deterioration or damage of recorded data.)
Message Meaning / Action
On screen messages
Cannot read le
The le is broken or unreadable.
The TV does not support the format.
(For the applicable formats and data, see p. 34.)
Is SD Card in?
Insert a SD card.
No valid le to play
The card has no data.
Selected photo
information is displayed
To stop in mid-cycle
SD CARD
View Software Licence information
B