A SERVICE OF

logo

STEP 11:
FIGURE 11
42
• Place one 3-1/2” PULLEY (16) into the loop of the CABLE (18) below the second and third PULLEY of the TOP BOOM (1) as shown
in FIGURE 11.
LOOSELY assemble two 3/16 X 1-3/4 X 5-1/4” PLATES (28) to each side of the 3-1/2” PULLEY (16) using one 3/8 X 2” BOLT (31),
two 3/8” WASHERS (40), and one 3/8” LOCK NUT (42). See FIGURE 11.
• Attach the CABLE (18) from the TOP BOOM (1) to the CARRIAGE (13) using one 1/4” QUICK LINK (48) as shown in FIGURE 11.
(IMPORTANT! Securely tighten QUICK LINK.)
!IMPORTANT!
SECURELY
TIGHTEN
31 3/8 X 2”
48
1
40
28
18
16
13
10
0
1
2
345
6
1/2 1/2 1/2 1/2 1/2 1/2