A SERVICE OF

logo

9
STEP 10:
FIGURE 10
Route one CABLE (18) through the TOP BOOM (1) as shown in FIGURE 10. (NOTE: Make sure CABLE is routed over bolt!)
SECURELY assemble three 3-1/2” PULLEYS (16) into the slots of the TOP BOOM (1) using three 3/8 X 2-3/4” BOLTS (32), six 3/8”
FLANGE SPACERS (39), and three 3/8” LOCK NUTS (42) as shown in FIGURE 10. (NOTE: Make sure the cable is routed over all the
pulleys.)
3/8 X 2-3/4” 32
16
1
18
39
42
Make sure CABLE
is routed over bolt!