A SERVICE OF

logo

Open as PDF
next previous
5 of 20
ISSUED: 10-01-07 SHEET #: 095-9272-2 06-15-09
Insert two M4 x 12 mm screws (A) into top two holes of

Hook screws onto keyslots of adapter plate as indicated in

*Note: If hole pattern is in a pocket, insert two M4 x 20 mm
screws (B) with two retaining spacers (C) into top two holes of
screen as indicated right.
Insert two M4 screws (A or B) through bottom holes of adapt-

2
g.2.1
 
secured, damage may occur to screen or product may fail.
WARNING

g.2.2
A
Screen may appear
slightlydifferent
thanillustrated
g.2.3
A or B
ADAPTER PLATE
C
*Forscreenswith
aholepatternina
pocket, spacers (C) go
between adapter plate
and screen.
FOR VESA
®
75
MOUNTING PATTERN:
FOR VESA
100
MOUNTING PATTERN:
UsingVESA75or100mmMountingPatterns
ADAPTER
PLATE