Peerless Industries PP730 Manual

next previous

6 of 20

ISSUED: 10-01-07 SHEET #: 095-9272-2 06-15-09

NOTE: Adjustment points (socket screws) are factory torqued for optimal performance. This factory torque setting is

recommended to prevent the screen from slipping over time. If more or less tension is desired follow this optional step.

You may not achieve optimal torque value if factory torque settings are adjusted.

Ifmoreorlesstensionisdesiredintiltmechanism,removesnapcapsasshownindetail2.Insertaathead

screwdriverintoslotandprycapawayfromtiltmechanism:

 E).

 

OPTIONAL

 

cause the screen to fall.

WARNING





SCREW



DETAIL 2



Ifmoreorlesstensionisdesiredinthearmpivotpoints,

dothefollowing:



I).



allen wrench (I).

NOTE:Donotturnmorethanhalfaturn.



All other brand and product names are trademarks or registered trademarks of their respective owners.

Peerless Industries, Inc.



Melrose Park, IL 60160

www.peerlessmounts.com

Attach cable tie anchor (H) to top or bottom of wall arm (AA) using M4 screw (M

cables to wall arm (AA) using cable tie (G

CordManagement

g.3.1



CABLES

g.3.2